All content is subject to change without notice. © Hocoma AG, CH-AO-QRG-en-20191031
• Position the orthosis as close
as possible to the body, without
touching it, in the 4 positions shown
on the screen:
A.
Hand module next to the patient’s
knee – the position of the hand is
recorded
B.
Hand module just above the
patient’s lap – the positions of the
wrist and elbow are recorded
C.
Hand module just in front of
the patient’s lower abdomen – the
positions of the wrist and elbow are
recorded
D.
Hand module just in front of the
patient’s face – the position of the
hand is recorded
• After assuming each of the poses
displayed, press the acknowledge
button on the Telestop to confirm
and go to the next
D
B+C
This quick reference guide is not meant to replace the user manual. In the case of doubt
regarding any information presented herein, please refer to the user manual. All users
must read the user manual before using the ArmeoPower. It is strongly recommended
that you regularly consult Hocoma’s website (www.hocoma.com/legalnotes) for the latest
available information. Please contact
for technical and
for clinical requests.
• Insert the upper arm and forearm
length in the software
A
The segment lengths and the height and weight of the patient in the
Patient Setup screen will influence the amount of arm weight support
applied to the orthosis.
