DIGMA 1010854, Руководство пользователя, Страница: 7 / 52

BUTTONS AND CONNECTORS
1. AV output
Analog Video/Audio (composite) output for dashcam connection to a TV or monitor.
2. Connector for holder with power terminal
Connect the holder to the connector until it clicks. The dashcam can either be powered with a
dashcam miniUSB connector (13) or a holder miniUSB connector.
3. Reset button
Press the Reset button if the dashcam does not respond when buttons are pressed, and/or when the
external power adapter is connected/disconnected.
4. Power button
When external power is available on connector 13 (or when the holder is connected to the miniUSB
holder connector), the dashcam will automatically switch on and, if an SD card is installed, begin
video recording. However, the dashcam can be switched on/off manually using the Power button.
Briefly press the Power button to switch the dashcam on. Press and hold the Power button to switch
the dashcam off. It can also be used for switching the screen on/off (brief press) in any mode.
5. MicroSD card slot
Slot for a microSD card. Please make sure you insert the card into the slot the right way up. If the
card is inserted the wrong way, it may damage the device and card. When a card is inserted into
device, it will be defined as the main data storage device: all previously recorded information on the
card could be lost. Please use high speed cards with recording class 6 or higher.