Control your
ZO
Powering On/Off
To turn your ZO on, push in & release the SVC. When on, the LightScale
indicator will illuminate.
To turn your ZO off, push in & hold the SVC until the light goes off.
Changing Contour Level with the SVC
When your ZO is turned on for the first time, the SVC will be set at the median
contour level, and the LightScale indicator will illuminate an amber color.
To increase the contour level, rotate the SVC upwards. When the contour level
reaches the maximum setting, the LightScale will transition to red.
To decrease the contour level, rotate the SVC downwards. When the contour
level reaches the minimum setting, the LightScale will transition to green.
Changing Volume Level with the SVC
To switch from Contour adjustment to volume adjustmemt, push in & release
the SVC. When turned on for the first time, the volume will be at the median
level, and the LightScale color will change to blue. Volume level will be indicated
by the intensity of blue light. Adjustment of volume level works the same way
as Contour level adjustment.
Standby Mode
When the LightScale is not illuminated, ZO is in standby mode. This directly
connects the audio source to ZO’s output. ZO also switches into standby mode
for uninterrupted listening when the battery gets low.
If using Line-Out
Turn ZO on first, and set the volume of the ZO at the minimum setting.
Then, adjust the volume accordingly. Also, when using line-out,
standby mode
should not be used.
Pg 3
digiZoid.com
