Know your
ZO
SmartVektor
™
Controller (SVC)
Input Jack
Output Jack
Charge Status
Indicator
USB Charging Port
LightScale Display
Colored LED displays the
selected contour & volume
levels, and secondary LED
blinks when battery is low
2
ZO
Turns ZO on/off, triggers standby
mode, controls sound contouring
and volume level adjustments
ZO
2
Neutralize the Source
When initially connecting your ZO to any audio source, you must start
with neutral source equalizer settings as indicated below...
For portable media devices, turn off all built-in equalizer settings which are
typically found in the device’s main menu.
For computers, turn off all software-related equalizers, which are normally
accessed through the audio player’s main menu. If it is accessible, turn off
any equalizer functions which may be associated with the computer’s sound
card.
When connecting to a car stereo, set the bass the treble to its neutral setting
(between min and max).
If you are connecting ZO through an aftermarket car stereo, turn off all sound
effect functions and set the equalizer to the “flat” preset.
Be sure to turn the volume of your source down to about 25% before using the
ZO! If using Line-out, be sure to turn the volume of the ZO
all the way down,
and do not use standby mode.
Pg 1
digiZoid.com
