8
11
10
9
PROGRAMMING THE SNOOZE INTERVAL
* Press and hold
1SET
button for two seconds to activate an
Alarm1 programming mode. Alarm1 hour digit will flash.
* Adjust the desired hour using
UP (+) or DOWN (-)
buttons.
* Press
1SET
button: the minute digits will flash.
* Adjust the desired minutes using
UP (+)
or
DOWN (-)
buttons.
* Press
1SET
button again: the snooze interval minutes
will flash.
* Adjust the desired interval time
using
UP (+)
or
DOWN (-)
buttons.
* Press
1SET
button to confirm set snooze interval.
Use the same procedure to program the snooze interval for
Alarm2.
INDOOR TEMPERATURE
The indoor temperature shares the same display’s line
with the calendar and the day of the week.
NOTE:
If the indoor temperature goes above or below
operating range stated in specifications, the display will
show dashes [ ]
PRECAUTIONS
This product is engineered to give you years of satisfactory
service if handled carefully. Here are a few precautions:
* Do not immerse the unit in water.
* Do not clean the unit with abrasive or corrosive
materials. They may scratch the plastic parts and
corrode the electronic circuits.
* Do not subject the product to excessive force, shock,
dust, temperature, or humidity, which may result in
malfunctions, shorter lifespan, damaged batteries, and
damaged parts.
SETTING THE ALARM
To set the Alarm1,
* Press
MODE
button once to display
ALARM TIME 1
. If the alarm is off,
the default time
“6:00”
will be
displayed.
* Press and hold
1SET
button for two
seconds. The hour digit will flash.
* Enter the hour using
DOWN (-)
or
UP (+)
.
* Press
1SET
button again. The minute
digits will flash.
* Enter the minutes using
DOWN (-)
or UP (+)
.
* Press
1SET
button again to confirm:
an icon [ ] will appear on the
display next to the alarm time.
* Repeat the same procedure to set an
Alarm2, using
2SET
button.
LIGHT/SNOOZE
When the alarm sounds, press the
LIGHT/SNOOZE
button
to temporarily stop the alarm. After the
LIGHT/SNOOZE
is depressed, the alarm sound will resume in five minutes.
If the alarm is not disabled after that, it will sound for
four more minutes and then will stop by itself.
DISABLING ALARM
Press
1SET
or
2SET
buttons on the unit to disable any of
the alarms.
When Al1 and Al2 are disabled, an applicable icon [ ]
or [ ] disappears from the unit’s display.
MANUAL SETTINGS
TIME ZONE
* Select the Time Zone by pressing and
holding the
UP (+)
button for 3 seconds.
* Keep holding
UP (+)
button until the
desired time zone (Pacific, Mountain,
Central or Eastern) is highlighted on
the clock’s display map.
CLOCK
* Press and hold
MODE
button for 3
seconds: the year digit will flash.
* Press
UP (+)
or
DOWN (-)
to
change flashing digits.
* After the first value is set, press
MODE
button again to confirm and
move to the next parameter.
* Continue setting month, date, hour
and minutes and the temperature
display in Celsius or Fahrenheit.
* Press
MODE
button for the last
time to confirm the settings after
the last parameter is set.
TIME FORMAT
* Press
UP(+)
button to toggle
between 12 and 24 hour time format
DAY OF THE WEEK LANGUAGE
* Press and hold
DOWN (-)
button
for 3 seconds: the default language
abbreviation will flash ( example –
EN
)
* Continue holding
DOWN (-)
button
until the desired day of the week
language abbreviation is selected.
* Release the
DOWN (-)
button to
confirm the setting.
ALARMS
There are two available alarms –Alarm 1 and Alarm 2.
If any of alarms is activated, it will sound at the set time
and the alarm icon will flash Mondays through Fridays.
AM
DATE
MONTH
DATE
MONTH
PM
DATE
MONTH
PM
DATE
MONTH
PM
DATE
MONTH
PM
DATE
MONTH
PM
DATE
MONTH
PM
DATE
MONTH
PM
DATE
MONTH
PM
DATE
MONTH
PM
DATE
MONTH
ALARM1
PM
DATE
MONTH
ALARM1
1
1
2
PM
DATE
MONTH
PM
DATE
MONTH
PM
DATE
MONTH
PM
DATE
MONTH
ALARM1
PM
DATE
MONTH
1
ALARM1
PM
DATE
MONTH
ALARM1
