11
DA-10213 Rev. 1.2
USE WITH IN-FLIGHT SEAT
When using the device on board an aircraft, remove the connector
for the cigarette lighter socket by pressing the knurled clip, and at
the same time pulling outwards, to release the „air adapter“ type
connector.
Connect the device to the socket,
fi
rst checking with the cabin staff
that this (in the case of use in „work“ mode with the Computer
switched on) will not interfere with the
fl
ight Instruments.
WARNING!!! In certain cases, especially if you are recharging
a completely
fl
at battery, the device may heat up. This is normal:
avoid bringing the adapter into contact with materi-
als that are sensitive to heat or placing it in direct sunlight.
Repeat steps 5, 6, 7 and 8.
SAFETY DEVICES
• Protection against excess current
• Protection against excess voltage
• Internal protection fuse
• Anti-overheating
device
• Protection for short circuits
CERTIFICATION
• Complies with FCC Class B speci
fi
cations
• Complies with RTCA D0-160D (FAA EMI) speci
fi
cations
• CE
• E
Mark
• UL,CUL,CSA
• TUV
• FAA
• ANSI,
CISPR
