6
3. Installing the USB/DVI Cable KVM Switch
3.1. System Requirements
1. A PC with USB port and 1 DVI port.
2. Windows 98SE or later, Mac OS 8/9/OS X, Linux Kernel 2.3 or later.
3. USB Keyboard and mouse.
4. Monitor with DVI port
3.2. Hardware Installation
1. Turn off computers.
2. Plug the USB keyboard, USB mouse, and monitor to the corresponding
connectors on KVM Switch.
3. Plug the Speaker and Microphone to the corresponding jacks on KVM
Switch.
4. Connect KVM switch cables to DVI, USB, Speaker and Microphone ports
on computers.
5. Turn on computers
Note: If the monitor can not support the maximum resolution it should
have with KVM switch, please restart the computers to work out the
problem.
3.3. Hot Swappable
The 2-port USB/DVI Cable KVM Switch supports hot-swap technology. All
the components can be added or removed at any time without shutting the
PC down.
3.4. Driver Installation (Windows 98/SE only)
After you connect the
2-port USB/DVI Cable
KVM Switch
to your PC, Win
98 will automatically detect the device and prompt for the driver installation.
Please install the
2-port USB/DVI Cable
KVM Switch
by the following
instruction from
Step A-G
.
Please have your Windows 98 CD ready.
