Digitus HIGH-SPEED 300N POWERLINE ACCESS POINT Скачать руководство пользователя страница 5

Страница: 5 / 58

FCC Part 15

The modem generates and uses radio frequency energy. If it is not installed and used properly in strict

accordance with the user's manual, it may cause interference with radio and television reception. The modem has

been tested and found to comply with the limits for Class B computing devices in accordance with the

specifications in Subpart B, Part 15 of the FCC regulations. These specifications are designed to provide

reasonable protection against such interference in a residential installation. However, there is no guarantee that

interference will not occur in a particular installation. FCC regulations require that shielded interface cables be

used with your modem.

If interference does occur, we suggest the following measures be taken to rectify the problem:

1) Move the receiving antenna.

2) Move the modem away from the radio or TV.

3) Plug the modem into a different electrical outlet.

4) Discuss the problem with a qualified radio / TV technician.

CAUTION:

Changes or modifications not expressly approved by the party responsible for compliance to the FCC Rules could

void the user's authority to operate this equipment.

Cable connections:

All equipment connected to this modem must use shielded cable as the interconnection means.

Notes:

Operation is subject to the following two conditions:

1) This device may not cause harmful interference, and

2) This device must accept any interference received including interference that may cause undesired

operation.

Содержание HIGH-SPEED 300N POWERLINE ACCESS POINT



























































Результаты поиска

Содержание HIGH-SPEED 300N POWERLINE ACCESS POINT

Отзывы:

Похожие инструкции для HIGH-SPEED 300N POWERLINE ACCESS POINT

Бренды по названию

Популярные бренды

Digitus HIGH-SPEED 300N POWERLINE ACCESS POINT, Руководство пользователя

Результаты поиска

Содержание HIGH-SPEED 300N POWERLINE ACCESS POINT

Отзывы:

Похожие инструкции для HIGH-SPEED 300N POWERLINE ACCESS POINT

Бренды по названию

Популярные бренды