10
To install a 2-port desktop KVM device, follow these steps:
1.
Insert the USB keyboard and USB mouse into the USB control port on the back
panel of the device.
2.
Connection HDMI display cable into the video output port on the rear panel of
the device.
3.
If you use a separate speaker and microphone, plug it into the control side analog
signal audio port on the front panel of the device.
4.
Connect the HDMI Computer with KVM cable (HDMI and USB)
5.
USB USB TYPE-C™ notebook computer is connected to the rear panel of the KVM
with corresponding connection cable included.
6.
Connection an extra USB power. (This is
Optional
, Power adapter is
NOT
included) If connecting an extra USB Type-C™ power to KVM. It is not only
provide KVM power, KVM can also power charging Notebook PC.
7.
Turn on the monitor.
8.
Turn on the computer.
9.
KVM can obtain the power for the device to work through USB or TYPEC interface
connected to the computer. After the device is powered, only the lights on the
front panel are lit accordingly. The default port is the notebook computer port
connected to USB TYPE-C™, and the red indicator light is lit.
10.
The user can select the port from
SWITCH button
or press keyboard hotkey:
Left [shift] + Right [shift]
Chapter 3 Basic Operations
Introduction
There are two ways to access the computers: the combined hot key on the keyboard
or Push button in front of the KVM switch
Manual Switch
The user only needs to press the button on the KVM front panel, and the buzzer will
send out a prompt tone to indicate that the switch port action is successful, and the
USB, audio and video signals of the corresponding port will be switched to the local
corresponding port.
