8
6.
CONNECTION AND OPERATION
Operation
1)
Connect PCs to USB-B ports of the unit with USB cables; Respectively connect
MIC and stereo ports of the PCs to those(above the “DisplayPort In”) of the unit
with 3.5mm audio cables; Connect PCs to “DisplayPort In” ports of the unit with
DisplayPort cables.
2)
Connect keyboard and mouse to the USB-A ports on the back panel of the unit;
Respectively connect microphones and amplifiers to the mic and stereo ports(on
the front panel/above “DisplayPort Out”) of the unit with 3.5mm audio cables;
Connect a display to “DisplayPort Out” of the unit with a max 2m DisplayPort
cable.(Or connect a display to “ HDMI Out” of the unit with an HDMI cable)
Note: When either “DisplayPort Out” or “HDMI Out” is connected, video is
output by the connected port automatically; When two of them are
conncected, video is output by DisplayPort.
3)
Power the unit with DC 5V and press the power button, the “Power” indicator
lights up.The USB-B ports are connected normally and the “Online” indicators
light up. “Select” lights up to indicate the current selected PC.
4)
Press the buttons on the front panel of the unit to select input, the
corresponding “Select” lights up. After selection, the display shows
corresponding image and the selected PC can be controlled by a set of keyboard
and mouse.
5)
Remote control works the same as manual buttons.
1,2,3,4: For input selection. 1 specifies PC1, 2 specifies PC2,
3 specifies PC3 and 4 specifies PC4.
,
For loop switching. Order: PC1
→
PC2
→
PC3
→
PC4
→
PC1
…
.
6)
For external function, connect printer/scanner/U-disk to the USB-A ports on the
front panel of the unit.