Wall-mounted installation
Fix the two screws on the wall as shown in the figure below
Place the switch smoothly on the screws to fix it to the wall
Turn on the switch
Please connect the AC power cord into the rear of the switch
and to an electrical outlet (preferably one that is grounded).
When the switch is power on, the LED indicators flash
momentarily for one second, which represents a resetting of
the system. The Power LED indicator turns on green.
Note: Please confirm the voltage is correct before power
on, otherwise the switch will be damaged.
(The power input is: 100V-240Vac, 50/60Hz.)
