Description
The DIGITUS PoE Splitter provide data and power via a single Ethernet Cable to
devices, which are not supporting Power over Ethernet. Just connect the input of the
Splitter to a PoE Switch or a PoE Injector and the output side to a non-PoE network
device such as an access point, IP Phone or a Camera to provide Power and Data. The
Extender is self-powered by PoE, so there is no additional power supply needed. The
output voltage can be regulated via a dip switch to 5V, 9V or 12V. So this Splitter
expand your network where you wish to place network device where are no power
outlets available.
Specifications
Item Description
Ports
1 10/100/1000M RJ45 PoE Port (DATA + POWER IN)
1 10/100/1000M RJ45 LAN Port (Only DATA)
1 DC Jack (DC OUT)
Network Media
10Mbps: Cat 3,4,5 Unshielded Cable
100Mbps: Cat 5,5E Unshielded Cable
1000Mbps: Cat 5E, 6 Unshielded Cable
Pass Through Data Rates
10/100/1000 Mbps
Power Output
Adjustable 5VDC/2A, or 9VDC/1A or 12VDC/1A
Input Power Requirements
DC Input Voltage: 36 to 57 Vac
Indicators
PoE ready / in-use
Connectors
Shielded RJ-45, EIA 568A and 568B
Dimensions 80x54x24mm
Environmental Conditions
Operating Ambient Temperature: 0 to 40
℃
Operating Humidity:
Maximum 90%, Non-condensing
Storage Temperature: -20 to 70
℃
Storage Humidity:
Maximum 95%, Non-condensing
Regulatory Compliance
IEEE 802.3af (PoE)
IEEE 802.3 (Ethernet)
IEEE 802.3u (Fast Ethernet)
IEEE 802.3ab (Gigabit Ethernet)
RoHS Compliant, CE, FCC
Electromagnetic
FCC Part15, Class B
