Installation
•
Attach fiber cable from the media converter to the fiber network. The fiber
connections must be matched - transmit socket to receive socket, the TX, RX
fiber cable must be paired at both ends.
•
Attach a UTP cable from the 10/100BASE-T network to the RJ-45 port on the
media converter.
•
Connect the power adapter to the media converter and check that the Power
LED lights up. The TX-LINK/ACT and FX-LINK/ACT LEDs will light up when all the
cable connections are satisfactory.
Table 1:
Fig 1: Front panel for dual fiber media converter
Fig 2: Front panel for single fiber media converter
LED Description
LED indicator lamp Status
Description
PWR
On
When power supply is normal
Off
When power supply fail
100M
On
When TP Port Link speed is 100M
Off
When TP Port Link speed is 10M
TX Link/Act
On
Connection status display for electric link.
“ON” indicates that electric link is in correct
connection.
Blink
Active status display of electric link
“Blink” indicates data transmitting
FX Link/Act
On
Connection status display for fiber link
“ON” indicates that electric link is in correct
connection.
Blink
Active status display of fiber link
“Blink” indicates data transmitting
