5
This cable is used to connect the console port of the switch to the external monitoring terminal. One end of the RJ45 eight-
pin plug, the other end is a 25-hole plug (DB25) and 9-hole plug (DB9), RJ45 head into the switch's console port socket, DB25
and DB9 can be used according to the requirements of the terminal serial port, the cable internal connection schematic as
follows:
Login Web-based Management
1. Connect the Ethernet cable to any of the ports on the front panel of the switch and to the Ethernet port on the PC.
2 This switch provides web login management. The default login information is as follows:
Type
Default parameter
IP address
192.168.2.1
Username
admin
Password
admin
3. Open the web browser and enter 192.168.2.1 (the factory-default IP address) in the address bar. Then press <Enter>.
(Please make sure the browser version is up to date)
To log in to the switch, the IP address of your PC should be set in the same subnet as that of the switch. The IP address is
192.168.2.x (”x” is any number from 2 to 254). Subnet Mask is 255.255.255.0
When the following logon dialog box appears, enter the password then click OK. By default, the username is
admin
and the
password is
admin
.
RJ45 <===> DB9