background image

 

Copyright Statement 

Our company reserves all copyrights of this document. Any 

reproduction, excerption, backup, modification, transmission, 

translation or commercial use of this document or any portion of 

this document, in any form or by any means, without the prior 

written consent of our company is prohibited. 

 

Exemption Statement 

This document is provided "as is". The contents of this document 

are subject to change without any notice. Please obtain the latest 

information through our company website. Our company 

endeavors to ensure content accuracy and will not shoulder any 

responsibility for losses and damages caused due to content 

omissions, inaccuracies or errors 

 

1.

 

Product Introduction 

The 8-Port 10/100 Mbps Network switch from DIGITUS® provides 

5 x RJ45 ports with 10/100Mbps bandwidth each. Easily expand 

the existing network. No configuration is required on the switch 

itself; thanks to auto-negotiation and Auto MDI/MDI-X, cables 

and speeds are also automatically detected. The switch can be 

used as a desktop variant or mounted on a wall. Thanks to the 

external power supply, the switch does not need a fan at all. Ideal 

for expanding / setting up small home or company network. 

 

 

Содержание DN-80069










Отзывы: