Please check all LEDs on the front panel. ‘PWR’ LED should be steadily on, WAN and
LAN LEDs should be on if the computer / network device connected to the respective
port of the router is powered on and correctly connected.
If ‘PWR’ LED is still off and you’re sure that all cable connections are connected
properly, please contact your dealer of purchase for assistance.
Network Setup
Please use the web browser to configure the wireless router. A computer with wired
Ethernet connection to the wireless router is required for this first-time configuration.
1. Set your computer to obtain an IP
address from wireless router: click
‘Start’ button (it should be located at
lower-left corner of your computer),
then click control panel. Double-click
Network and Internet Connections
icon, click Network Connections,
then double-click Local Area
Connection, Local Area Connection
Properties window will appear, and
then click ‘Properties’:
