Getting Started
Setting up a Wireless Infrastructure Network
For a typical wireless setup at home (shown above),
Please do the following:
1.
You will need broadband Internet access
(an ADSL, Cable Modem line into your home or office).
2.
Consult with your ADSL or Cable Modem provider for proper
installation of the modem.
3.
Connect the ADSL or Cable modem to DN-70182 WAN port
4.
Plug the power plug of the Router in electrical wall socket.
5.
Connects an Ethernet cable from your computer to the LAN
port of DN-70182.
IMPORTANT NOTE
You can reset your Wireless Router to default setting by
press and hold the ‘RESET’ button inside the tiny hole for
8 ~10 seconds.
You can use this solution if you forget your password.
