How to configure the Wi-Fi Repeater
You can configure the Wi-Fi Repeater after connecting it with your computer/laptop
with enclosed RJ45 cable or wirelessly.
A. Configure the Wi-Fi Repeater wirelessly
A1.
Plug the Wi-Fi Repeater to a wall socket.
A2.
Click on the network icon (
or
) on the right bottom of your desktop.
You will find the signal from the
Digitus 300N Repeater
.
Click on ‘
Connect
’ and wait for a few seconds.
A3.
Open web browser and type
http://192.168.10.1
in the browser's address box.
This number is the default IP address for this device.
Note:
Please check whether the WiFi-Repeater accord with factory default settings
once you can’t download http://192.168.10.1. If you are still not sure what reasons,
you can reset the WiFi-Repeater, just need to press the reset button for 10 seconds,
then try again.
Digitus 300N Repeater