DIP SWITCH FUNCTION
This unit is equipped with dip switches, located on the front panel.
Adjusting the dip switches will change the default function of this unit.
This unit has set to manufacturer default as: Port 5 SFP and the speed
are set to 1000M for both port 5 and port 6 SFP ports. You may adjust
dip switch setting to select port 5 as TX (disable port 5 SFP) or set SFP
speed to 100M. The detail setting as shown below:
WARNING
Dip switch function will not
work if it is changed when
power is connected.
Always turn off or
disconnect power supply
to change dip switch
settings.
LED indicator
PW1
ON -- when V1+, V1- is connected
F6
ON – port 6 SFP fiber is detected
OFF – port 6 SFP fiber is not
LNK
ON—TX link is detected
OFF – TX port is not detected
PW2
ON -- when V2+, V2- is connected
ERR
ON –
Connect only PW1 or PW2.
OFF-
F5
ON – port 5 SFP fiber is detected
OFF –port 5 SFP fiber is not
