7
4.3 Live View
Go to “Main Menu”
→
“Parameter”
→
“Display”
→
“Live” to enter the menu as shown below.
Channel:
Select channel number.
Show Time:
Tick the checkbox to
display the time.
Channel Name:
Name marked on IP
camera.
Date Format:
Set date format such as
mm/dd/yyyy or yyyy/mm/dd.
Time Format:
12-hour or 24-hour.
OSD Position:
Freely set the position
of IP camera name and time.
4.4 Output
Go to “Main Menu”
→
“Parameter”
→
“Display”
→
“Output” to enter the menu as shown below.
Video Output:
Live output.
Seq Mode:
Set sequence mode.
SEQ Dwell Time:
Sequence dwell time
is 5 seconds by default. You may set it
as required.
VGA/HDMI Resolution:
VGA output or
HDMI output. Including 1024×768,
1280×1024, 1440×900, 1280×720,
1920×1080, 1680×1050, 1600×1200,
1900×1200, 2560×1440, 3840×2160.
Transparency:
Set the transparency of
the menu in the range of 0-128.
4.5 Record
Go to “Main Menu”
→
“Parameter”
→
“Record”
→
“Record” to enter the menu as shown below.
Channel:
Set the desired channel in the
drop-down menu.
Record:
Set up the record status
(Enable/Disable) of each channel.
Stream Mode:
Select Mainstream or
Substream.
PreRecord:
“Enable” status supports
pre-record for motion detection record or
I/O trigger record.
