11.
If the product voltage is above safety voltage 36V, please install it away from
crowd, dispose the grounding of earth wire and make sure lightning protection
is done.
12.
To ensure the life time of product, please do not install in salt, acid, fog
environment.
13.
Connect our sales person if you need additional parts for installation.
Maintenance
Cut off power before maintenance.
Clean the glass regular to get better transmission of light
Clean the housing to get well heat dissipation performance
Clean by dry dishcloth; don't use water or strong corrosive solution.
Hereby ASSMANN Electronic GmbH, declares that this device is in compliance with the requirements of
Directive 2014/30/EU and the Directive 2011/65/EU for RoHS compliance. The complete declaration of
conformity can be requested by post under the below mentioned manufacturer address.
Note:
If wrongly installed or improperly used in the living area, the device can cause interference in radios and
other electronic devices. Appropriate use is when the device, as far as feasible, is operated with shielded
connection cables (with network products in addition to category 5 shielded cables and higher). The
device has been tested and falls within the limits of class A computing equipment according to the
requirements of EN 55032.
Warning:
This device conforms with test category A - it can cause radio interference in the living area; in this case
the operator may demand that appropriate measures are implemented and arise for this reason.
Declaration of conformity: The device fulfills the EMV requirements according to EN 55032 for ITE and
EN 55024 class A. In this way, the fundamental protection requirements of the EMV-2014/30/EU
guideline are fulfilled.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany
