7
LAN
setting function:
The utility featured with “
LAN
” setting function to help user to modify the IP parameters of the
installed network devices. User can step by step to setup IP address, username and password.
Note
1: If no IP address is assigned within 30 seconds, the networked device will automatically
assign 192.168.0.100. User may now open your web browser, and key in
http://192.168.0.100
in
the address bar of you web browser to logon Network Camera’s web configuration page.
Note 2
: Power Line Frequency
-
If you found the video image is flash, you may need to choose 50 or 60 Hz frequency
(depends on country).
-
World wide power line frequency table is inside user’s manual, Appendix
Note 3:
If you have problem when connecting the network camera to a router, please read user’s
manual inside CD, the section “Installation to a router”.
