VIDEO VIEWER MISCELLANEOUS CONTROL PANEL
-26-
Camera
Click “
” (Miscellaneous Control)
→
“
” (Server Setting)
→
“Camera” to go into the “Camera” page and
access the following functions. Find the camera settings that best suit your image needs by testing.
Function
Description
Backlight
Enabling backlight compensation makes the subject clearer if the image background is too bright,
or if the subject is too dark.
AGC
Auto Gain Control is a function that can adjust the amplitude of the signal input according to the
light conditions. There are four options: “Low”, “Medium”, “High” and “Off).
Low:
When the light condition is too bright, you can select “Low” for lower sensitivity.
Medium:
When the light condition is normal, you can select “Medium” for normal sensitivity.
High:
When the light condition is too dark, you can select “High” for higher sensitivity.
Off:
Disable the auto gain control function.
P.S. The higher the sensitivity is, the more the signal noise will be.
Sharpness
Sharpness is a function that can enhances image detail by increasing the aperture gain of the
camera and sharpening the edges in the images. There are four options: “Auto”, “Low”, “Medium”
and “High”).
Auto:
The camera automatically maintains a normal sharpness level.
Low / Medium / High:
The sharpness of the image can be set manually by choosing different
sharpness level.
White Balance
White Balance is a function that processes the viewed image to retain color balance over a color
temperature range.
According to different color temperature and installation place, choose different white balance
mode (“Auto”, “Indoor 1”, “Indoor 2”, “Sun” and “Cloudy”).
Auto:
Balance the color automatically depending on the different color temperature.
Indoor 1 / Indoor 2 / Sun / Cloudy:
According to different color temperature and installation place,
choose different white balance mode.
P.S. The color temperature of the “Indoor 1” mode is about 9000K. The color temperature of the
“Indoor 2” mode is about 3000K. The color temperature of the “Sun” mode is about 5500K. The
color temperature of the “Cloudy” mode is about 7000K.
Shutter Speed
Shutter Speed is a function that can adjust the duration of the electronic shutter to produce
optimum image quality.
A slower shutter speed in dark conditions will help to produce a brighter image, but will produce
fewer frames per second, which may cause images to be blurry during motion.
AutoFocus
There are three types of auto focus mode: “Always”, “Moving” and “Zooming”.
Always:
Automatically adjusts the image focus.
Moving:
Adjusts the image focus only when the PTZ camera is under the movement of
panning/tilting.
Zooming:
Adjusts the image focus only when the PTZ camera is under the movement of zooming.
IRIS
IRIS level is used to adjust the amount of light reaching the image sensor for best image results.
By pressing and dragging the slider, you can increase the value to brighten the image or decrease
the value to darken the image (50 ~ 250, default value is 162).
Apply
After setup, click “Apply” to confirm.