3
Chapter 1 Introduction
Congratulations on your purchase of this
10/100/1000Mbps Gigabit LAN Card
DN-10110. The
Value leader among Gigabit adapters for PCI Bus personal computers. Instructions for installing
and configuring this product can be found in this manual. Before you install and use this product,
please read this manual carefully for full exploiting the functions of this product.
The DN-10110 provides the bandwidth capability to support high-end servers and workstations.
With Auto-negotiation, this card can run on three different speeds: 10Mbps at half and full duplex,
100Mbps at half and full duplex, and 1000Mbps at full duplex. When running at 1000Mbps, it
provides a network throughput of 2Gbps in full-duplex mode.
1.1 Features
Designed for versatility and performance, the DN-10110 LAN Card provides the following:
Operability in 32-bit,33/66MHz slot servers and workstations
Compliance with IEEE802.3ab 1000BASE-T Gigabit Ethernet standards,
IEEE802.3u Fast Ethernet standards
• Plug-and-Play installation
• Support PCI Revision 2.1,2.2,2.3
• Support half and full duplex at 10Mbps, half and full duplex at 100Mbps,
and full duplex operation at 1000Mbps
• One build-in RJ45 connector
• Auto-Negotiation to the highest available speed
• Support up to 128Kbytes Boot ROM
• Support IEEE802.1P Layer 2 Priority Encoding
• Support Full Duplex flow control (IEEE 802.3x)
• Support IEEE 802.1Q VLAN tagging
• Support PCI Message Signaled Interrupt (MSI)
• Build-in FIFO buffers reduce overhead of memory transfers
• Support Microsoft NDIS5 Checksum Offload (IP, TCP, UDP) and large send offload
• Support Jumbo Frame transfers
• Two LED indicators: 10/100/1000M Link, 10/100/1000M Act
• Driver support for:
Microsoft Windows Series.
Linux
Novell Netware Series
1.2 Environmental
• Storage
Temperature: -40oC ~70oC
• Operating Temperature : 0oC ~40oC
• Storage Humidity: 5% ~90% RH Non-condensing
• Operating Humidity: 10% ~90% RH Non-condensing
