Digitus DA-90433, Быстрый старт

Страница: 12 / 13

12
• If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent, or a similarly qualified person in order to avoid a hazard
•
Please make sure there is no hazard sources in your operating environment
e.g., do not litter the tools around. Always be careful to treat the packaging
materials to avoid any possible danger, e.g., plastic bag may lead to choking
hazard to children
• Keep the original package of the equipment, if necessary, in case of the
future use in transportation
•
Power supply: AC 100 V – 240 V, 50 / 60 Hz
• Operating Temperature: 0 – 40°C
• Unplug the power plug before cleaning, wipe the dust off the surface with a
slight wet dishcloth, be careful do not let the drops into the internal parts
and do not lose the connector
• The electric box contains electronic components, metals plastics, wires etc.,
so dispose of it in accordance with each countries environmental legislation,
not the general household waste
• Slight noise caused by the V-ribbed belt or brake system due to structure
will not have any effect on the use of the equipment
• Corrosive or abrasive materials are forbidden to clean the equipment.
Must ensure that the cleaner used will not pollute the environment
• This appliance shall only be used together with the
included power supply unit. Every person who is responsible for this table
at installation or employment of the table in daily use or in service and
repair work should carefully read these instructions. Keep these instructions
close to your sit/stand table
• The table shall only be used as a working table with the possibility to
continuously adjust working height between sitting and standing position.
The table shall only be used indoors and in dry premises (office
environment or similar).
•
The table must not be overloaded – maximum load is 100 kg
• The motors may be run continuously for maximum 2 minutes. Afterward,
the motors must stand by for approx. 18 minutes before they can
be used again
•
Any failure to comply with the safety and installation instructions in this
manual may cause serious bodily injury
•
Users should make sure that they never sit on the desktop in order to
prevent serious bodily injury
• Don't clean the product with water while the power is still connected
• Don't disassemble or replace components while the power is still connected
•
Never operate the system with a damaged cord or plug