Digitus DA-71050, Руководство пользователя, Страница: 4 / 4

V. Driver Installation
a. Under Windows 8/7/Vista/XP/2000: No driver needed
Under system Windows 8/7/Vista/XP/2000, system will automatically detect the new hardware and
finish the setup! Then an icon will appear on the right-bottom area of the system toolbar as below:
Congratulations to enjoy this product now!
b. Setup mode under Mac OS system
Under system is Mac OS 9.0 or above, the system can find the driver automatically.
If your system is 8.6, please download [USB Mass Storage Support 1.3.5] from the following link:
http://www.apple.com/support
VI. Power Supply:
Power Supply: Voltage input: AC 100~240V, 50/60Hz
Voltage output: DC 12V / 2A
VII. Remove the external enclosure
Before removing this unit from your computer, please finish the following procedures for a safe removal:
1. Click the icon in the [Desktop] window of your computer
2. A [Safely Remove Hardware] message window will appear , click the [Stop] button
3. [It is now safe to remove the USB device] message will appear,
close the [Safely Remove Hardware] window
Remove the USB cable and Power off the adapter if it is applied.
VIII. Format a new Hard Disk Drive
If you use a new Hard Disk Drive, you must format it before you use it. Please follow the steps
as bellow to format your new Hard Disk Drive:
1. Right click [My Computer], and select [Manager]
2. System will display a "Computer Manager" window, and click [Disk Manager] in left window
3. In the right window, the message of the new Hard Disk Drive will appear under the system disk,
such as [Seagate....]
4. Right click the new disk drive, and select [Delete partition]
5. Right click the new disk drive, select [New partition]
6. Right click the new disk drive, select [New logical drive]
7. Right click the new disk drive, select [Format disk drive]
8. Now you have formatted the new disk drive, then in [My Computer] ,
the new Hard Disk Drive will appear and you can use it