10
4.
Click Yes
5.
A message may appear to state which software packages will
also be uninstalled
Click Yes to uninstall the packages that use Displaylink
Core Software
The uninstaller automatically uninstalls the software
6.
Once uninstalled, you will be prompted to reboot. Click Yes to
complete the uninstall
3.2 Configurations (Mac OS X)
3.2.1 Introduction
This guide applies to software version 1.0 and above of the MAC
software
What is the Mac Driver?
The Mac driver is designed for Mac OS X 10. 4 (Tiger), 10. 5 (Leopard)
and 10. 6 (Snow Leopard), 10.7.5 (Lion), 10.8.2(Mountain Lion) to
enable you to add an additional monitor to your Mac using
Displaylink technology. This software allows you to run your UGA
devices on any Intel based desktop or laptop Mac, allowing you to
connect up to 4 additional monitors via USB.
Please Note: Power PC-based Macintosh computers, such as late-
model iMacs, PowerBooks and PowerMacs, are not currently
supported
3.2.2 Setup Guide
1.
Installing / Uninstalling the MAC Driver
2.
To run the MAC Installer, double-click the MAC Driverlnstaller
(image: this will mount the MAC Driverinstaller)
3.
Select Software Installer to begin installing the MAC Driver on
your Mac. This will run a standard Mac installer and will require
a restart once complete.
4.
Select User Guide to view the User Guide
5.
Select Software Uninstaller to uninstall the MAC Driver from
your Mac. This will require a restart once complete