Hardware Installation:
1. Plug the included AC power adapter into the power jack at the rear
of the USB 4 port hub and an electrical outlet.
2. Plug the USB 3.0 A type connector into the upstream port
3. Plug the micro-USB into a computer or USB hub downstream port
4. Connects USB devices or hubs to the 4 port hub’s downstream 1 ~ 4 ports.
Important Note:
The Hub must be connected to a USB 3.0-compliant host in order to function in super-speed mode
(5 Gbps data rate). If the Hub is connected to a USB 2.0 or 1.1-compliant host, it will operate only
in high-speed, full-speed or low-speed mode (480 / 12 / 1.5 Mbps).
Safety Instructions:
Always read the safety instructions carefully
Keep this user’s manual for future reference
Keep this equipment away from humidity.
If any of the following situation arises, get the equipment checked by a service technician:
• The equipment has been exposed to moisture
• The equipment has been dropped and damaged
• The equipment has obvious sign of breakage
• The equipment has not working well or you cannot get it work according to this user’s manual.
© DIGITUS. All rights reserved.
Trademarks:
All the companies, brand names, and product names referred to this manual are the trademarks or
registered trademarks belonging to their respective companies.
Note: If wrongly installed or improperly used in the living area, the device can cause interference in radios and other electronic
devices. Appropriate use is when the device, as far as feasible, is operated with shielded connection cables (with network
products in addition to category 5 shielded cables and higher). The device has been tested and falls within the limits of class B
computing equipment according to the requirements of EN 55022.
Warning: This device conforms with test category B - it can cause radio interference in the living area; in this case the operator
may demand that appropriate measures are implemented and arise for this reason. Declaration of conformity: The device
fulfills the EMV requirements according to EN 55022 for ITE and EN 55024. Devices with external or integrated power supply
furthermore fulfill the requirements of EN 61000-3-2 and EN 61000-3-3. In this way, the fundamental protection requirements
of the EMV-2014/30/EU guideline are fulfilled. The CE conformity has been proven. The pertinent declarations are deposited
with the manufacturer.
www.assmann.com
ASSMANN Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany
PDA/Cell Phone
USB 3.0
Graphics Adapter
Power
Digital Video
Digital Camera
Flash Driver
Printer
MP3 Player
Scanner
Computer/Laptop
