Page 7 of 26
III. 2-port USB KVM Switch installation
1. System requirements:
·
Computer:
USB port, VGA port
·
Operating
System:
Windows 98/98SE/2000/ME/XP/Vista, Mac
OS9/OSX, Linux Kernel 2.3 or Later, Solaris 8.
·
VGA
Cable:
1 VGA female-to-male cable per computer
·
USB
Cable:
1 USB cable with one Type-A end and one Type-B end per
computer
·
2. Hardware installation:
a. Connect the USB cable’
s Type-A end to the computer’
s USB port, and the
cable’
s Type-B end to the KVM’
s PC1 USB upstream port.
b. Connect the VGA male-to-Female cable between the VGA port on the
computer’
s video card and the KVM’
s PC1 monitor IN.
c. Repeat steps a thru b for the second computer, using the PC2 USB port and
monitor IN on the KVM.
PC1 HOST (RED)
PC2 HOST (RED)
HUB switch with PC1(Green)
HUB switch with PC2 ( Green )
Auto-Switch/ Auto-Scan ( Green )
