Digitronic
Digital-Analog-Converter
Automationsanlagen GmbH
CamCon DAC16
8. Technical data
Display ................................................................ 2 Status LED´s for supply voltage and error messages
Number of outputs ..............................................two 16 Bit analog outputs.
Type of output ..................................................... Power or optionally voltage.
Current output ..................................................... optionally 0 - 20mA, 4 - 20mA or 0 - 24mA
at RL maximum 550
Ω
.
Voltage output ..................................................... +/- 10Volt up to 10mA (not short circuit proof)
Resolution ........................................................... 16Bit.
Maximum response time with full levellift............ approximately 3ms.
Length of the connection cable
between CamConDC16 and CamCon DAC16 ... maximum 300m.
Supply voltage..................................................... 24VDC
±
20 %
Power consumption ............................................ approximately 60mA without load.
Connections for:
Voltage supply and outputs ................................ via plug-in screw clamps IP20
Assembling ......................................................... comfortable snap-on assembling, carrier rail according
to EN 50 022, may be set in rows with 10mm gap for
air circulation
Disassembling..................................................... by pulling back the snap-bars.
Dimensions ......................................................... See chapter 4. Dimensions on page 4.
Protection ............................................................ Case corresponds to IP20.
Working temperature .......................................... 0°C ... + 50° C
Weight.................................................................approximately 150g
Edition: Aug. 04
Page: 7
2 rue René Laennec 51500 Taissy France
Fax: 03 26 85 19 08, Tel : 03 26 82 49 29
E-mail:[email protected]
Site web : www.hvssystem.com
