6
PHONO OPERATION
1. Press the “
MODE
” key to
PHONO
mode. Then put a
record on the Platter lightly. In certain circumstances, 45
RPM adapter is needed;
2. Select the speed of record: 33 1/3, 45, 78rpm according
to vinyl to played.
3. Remove the stylus guard and push the lift lever upward to
raise the tone arm from the arm park, and then move the cartridge holder over the
record gently, now the platter will run automatically (default set of Auto/Manual
stop switch at ON position ). Then put down the lever, the tone arm would drop
and touch record surface gently. Now users can enjoy their favorite songs.
4. Select the auto/manual stop control: The turntable will stop automatically while
the song on the record finished when the switch at ON position. The other side it
will always play when it is at OFF position, this may helps to play some long
recorded vinyl which can not be played to the end by normal way.
5. Rotate the volume control knob to get desired sound level.
6. Push the arm lift lever up to raise the arm, now platter will still running but play
will pause. To continue the play, user just need to put down the lever.
7. Record vinyl: Firstly insert memory device (USB flash disk or SD /MMC card).
When turntable is working, Press “REC” key and the screen will be flashing
“USB” or “SD” (It depends on what memory you have inserted).
If you insert
both USB and SD card to the product, you can choose USB or SD to save the
recorded vinyl by pressing “PREV” key or “NEXT” key.
Then press “REC”
key again and the screen will be flashing “REC”, then press “PLAY/PAUSE” key
to start recording. If you want to stop recording, please press the “STOP” key and
the screen will be flashing “REC”, then press “REC”key to stop recording.
Note1: When you insert both USB flash disk and SD Card, the default priority to
recorded file will be saved into the USB flash.
Note2: Recorded file in mp3 format with 192kbps.
CASSETTE TAPE OPERATION
1. Press the “
MODE
” key to
TAPE
mode.
2. Insert a pre-recorded cassette tape into tape slot, with the exposed side facing
right. By pushing, the cassette will slide into the tape mechanism and play
start automatically.
Note: one end of tape will remain visible.
3. Adjust volume control to your desired sound level.
4. Depress the eject button completely in, the tape will be ejected from the slot.
5. Press the eject button half way to fast forward of the tape you are listening.
6. The tape will stop automatically when it comes to its end.
7. Record Cassette: Firstly insert memory device (USB flash disk or SD /MMC
card). When Cassette is working, Press “REC” key and the screen will be
flashing “USB” or “SD” (It depends on what memory you have inserted).
If