DIGITEN DTC-101 Скачать руководство пользователя страница 3

-1-

The Thermostat is simple-stage, electronic temperature controller. The large, 

lighted LCD screen display is easy to read. The case is designed with fireproof 

ABS material for human engineering. Temperature sensor is waterproof with 
high quality, high-accuracy.

Features

●Large LCD screen   

Display the sensed temperature, setting temperature, and custom icons on the 
display indicate working mode.

●Support reading with Centigrade or Fahrenheit unit; 
●Easy to use and program   

Only 2-steps setting for your application, and plug and play design.

●With a temperature correction function   

Allow user to adjust measuring accuracy base to on different probe, etc.

●Delay starting protection    

Protect refrigerating compressor lifetime, avoid compressor to compressor 
start frequently.

●High and low temperature alarms are available;
●Over-temperature and sensor fault alarm

Technical Specifications

Temperature Control Range

-40~120

°

C, -40~248

°

F

Temperature Resolution

0.1

°

C, 0.1

°

F

Temperature Accuracy

±1

°

C, ±1

°

F

Temperature Control Mode

Heating and Cooling

Input Power

100~240VAC, 50/60Hz

Temperature Control Output

Max.10A/15A, 100-240VAC

Maximum output load

DTC-101, 1100W@110V, 2200W@220V;
DTC-151, 1650W@110V, 3300W@220V

Buzzer Alarm

High and Low Temperature Alarm

Sensor Type

Waterproof NTC sensor (Including)

Sensor Length

2m, 6ft

Relay Contact Capacity

DTC-101(10A, 100-240VAC)
DTC-151(15A, 100-240VAC)

Input Power Cable Length

150 cm/5ft

Output Power Cable Length

18cm/7”

Note: The waterproof temperature sensor works with water, seawater, weak 
acid or weak base liquid.

Содержание DTC-101











Отзывы: