Factory Reset/Pedal Calibrate -
To reset the User programs to their factory settings and calibrate the
expression pedal, press and hold the
<BYPASS/(Hold)TUNER>
foot switch and apply power to the unit.
Wait until the letters
rS
appear in the display and release the foot switch. The display will now show:
Pd
and
CA
, indicating that you are in pedal calibrate mode Once
Pb
appears, rock the pedal back and
press the
<BYPASS>
foot switch. When
PF
appears, rock the pedal forward and press the
<BYPASS>
foot
switch.
SA
will next appear in the display to confirm the pedal is now calibrated.
Specs
A/D Convert - 18bit 128x oversampled
D/A Convert - 18bit 128x oversampled
Sample Rate - 46.8 kHz
Frequency Response - 20Hz ~ 20 kHz
S/N - Greater than 90dB
1/4" Input Jack (1), Output Jacks (2)
Externally powered (PS750)
DECLARATION OF CONFORMITY
Manufacturer’s Name:
Digitech
Manufacturer’s Address:
8760 S. Sandy Parkway
Sandy, Utah 84070, USA
declares that the product
Product Name:
XP-100
Product Options:
All ( with a Class II power adapter that conforms to the requirements of
EN60065, EN60742, or equivalent).
conforms to the following product specifications:
Safety
:
EN 60065 (1993)
IEC63 (1985) with Amendments 1,2,3
EMC
:
EN 55013: (1990)
EN 55020: (1991)
Supplementary Information:
The product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC and the EMC Directive 89/336/EEC as amended by
directive 93/68/EEC.
Digitech
President of Digitech
8760 S. Sandy Parkway
Sandy, Utah 84070, USA
Effective: 2/7/97
European Contact: Your Local Digitech Sales and Service Office or International Sales Office at:
3 Overlook Drive #4
Amherst, New Hampshire 03031, USA
Tel (603) 672-4244
Fax (603) 672-4246
8760 South Sandy Parkway
Sandy, Utah, 84070
Telephone (801) 566-8800
FAX (801) 566-7005
International Distribution: 3 Overlook Dr Unit 4
Amherst, New Hampshire 03031 U.S.A.
FAX (603) 672-4246
DigiTech™, XP-100™ are registered trademarks of HARMAN INTERNATIONAL
Copyright © 1997 HARMAN MUSIC GROUP
Printed In USA 2/97
Manufactured in the U.S.A.
XP-100 18-2174-B
OS v1.00
