DigiTech WORLD BAND RADIO, Руководство пользователя, Страница: 18 / 19

18
This socket locates on the back of the radio is primarily for antennas
designed to be fed with 50 or 70 ohm coaxial cable, such as dipoles
or comparable antennas, It can also be used for long wire antennas.
Use PAL type connector for feeding this socket.
FM/SW/DAB EXTERNAL ANTENNAS
If you are in a brick or metal building, AM can be greatly improved
with the addition of a simple antenna. A small diameter insulated
stranded wire, about 60" in length is a good place to start. Antenna
wire can be attached by pressing the spring loaded lever and
inserting the wire.
The “GND” jack is used with the “MW(AM) EXT. ANT.”. Attached one end
of a length of wire to be Ground jack and the other end to a good
earth ground.
Caution: Do not use external antenna when it is in thunder storm.
MW(AM) EXTERNAL ANTENNA/GND Jack
Press and hold down INFO/LIGHT button to select light on all the time or off.
Press this button for 2 or 3 seconds, the backlight will flash one time, which
indicates the backlight keeps on all the time. If the backlight is off, which
indicates it will be on when pressing this button. If no operation, the backlight
will be off after 10 seconds.
BACKLIGHT ON
/
OFF OPERATION