DigiTech whammy ricochet, Руководство пользователя

Страница: 5 / 10

3
7. Range Switch
Selects whether the pitch of the incoming signal will be shifted up or down.
8. Trajectory LED Ladder
These LEDs light in sequential order to provide a visual indication of pitch shifting direction and
rate. For example, the LEDs will light from top to bottom when the incoming note is shifted down.
Conversely, the LEDs will light from bottom to top when the incoming note is shifted up. When the
effect is bypassed, these LEDs will cycle in the direction selected by the RANGE switch at 2 second
intervals.
9. Momentary Switch
Sets the operation of the Footswitch. When set to the “ON” position, the Whammy effect will only
be enabled as long as the Footswitch is held down. When set to the “OFF” position, the Whammy
effect will toggle between enabled and bypassed modes each time the Footswitch is pressed.
NOTE:
When the MOMENTARY switch is set to the “ON” position, the Whammy Ricochet will
use a buffered bypass signal path. When the MOMENTARY switch is set to the “OFF” position, the
Whammy Ricochet provides a hard-wired bypass signal path.
When the MOMENTARY switch is set to the “OFF” position and the pitch effect is turned on with
the Footswitch, setting the MOMENTARY switch to the “ON” position will make the effect always
be on and the Footswitch will now momentarily toggle the effect off. To restore having a bypassed
state when the Footswitch is not pressed for momentary operation, set the MOMENTARY switch
in the “OFF” position and use the Footswitch to bypass the effect before you set the MOMENTARY
switch back to the “ON” position.