DigiTech TRIO+ Band Creator+ Looper, Руководство пользователя

Страница: 31 / 63

28
ADVANCED FEATURES
Enabling A Drum Stick Count-In
The TRIO+ has a drum stick count-in feature that can be used to perform the following functions:
• Provide a 1-bar count-in before playing a song.
• Record loops with the band that start on the first downbeat of a part.
The count-in feature is a one-time operation, so it must be enabled each time you want to use it. It can be
enabled by pressing and holding the selected PART button for 2 seconds. The following section provides step-
by-step instructions on using the count-in feature in the scenarios described above.
NOTE: The TRIO+ must be taught at least one part before the count-in feature is available.
Starting A Song With A Count-In
To enable a 1-bar count-in before playing a song:
1. With band playback stopped, press the PART button to select the first part that will be played for the song.
If you have programmed a song sequence, this will already be selected. Either way, the button for the
currently selected song part will now be brighter than all the others.
2. Press and hold the currently selected PART button for 2 seconds (the PART button will begin flashing at
the rate of the selected part's tempo and enable the count-in feature). Note that pressing and holding the
PART button again for 2 seconds will disable the count-in.
3. Press the BAND footswitch when you're ready to start the count-in.
4. After the 1-bar count-in, the band will start playing and you can play along with it.
Recording A Loop With The Band Using A Count-In
It can be very helpful to hear a count-in before you start recording a loop with the band — for example, when
recording a solo that starts on the first downbeat of the part.
To enable a 1-bar count-in and record a loop with the band:
1. Press the BAND footswitch to stop band playback.
2. Set the LOOP level knob to 12 o'clock.
3. Ensure the AUDIOLASTIC™ LED is off. If it isn’t, adjust the TEMPO control and set it to the 12 o'clock
position — the AUDIOLASTIC LED should now turn off.
4. Select the part you wish to record the loop on.
5. Press and hold the currently selected PART button for 2 seconds (the PART button will begin flashing at
the rate of the part's tempo and enable the count-in feature). Note that pressing and holding the PART
button again for 2 seconds will disable the count-in.
6. Press the LOOPER footswitch to arm the looper.
7. Press the BAND footswitch when you're ready to start the count-in.
8. After the 1-bar count-in, loop recording will begin and you can start playing on the downbeat.
9. Loop recording will automatically stop and playback will begin when the end of the part is reached. If your