29
MULTI EFFECTS MODULES
The Studio 400, Multi Effect Modules allow the User to combine either Delay and Chorus or Delay and
Flange within one Effect module block. This is ideal for situations where the User needs to add another
effect to the Effect Configuration, but is running low on signal processing resources. Within the module,
there is a unqiue parameter that allows you route the signal several different ways between the two
effects.
✓
Flange/Delay
Chorus/Delay
Dry: Level
Controls the level of the dry (uneffected) signal. Ranges from OFF to 100%
Balance
Controls the left/right posistioning of the dry signal in the strereo sounfield. Varies from -99 (all left) to
99 (all right).
Route
Selects the route signal path within the Chorus/Delay, and Flange/Delay Multi effects modules.
The 3 settings are: 1) Chorus/Flange into Delay with feedback into the Delay 2) Chorus/Flange into Delay
with feedback into Chorus/Flange 3) Delay into Chorus/Flange with feedback thru the Chorus/Flange.
✓
Speed
Controls the Low Frequency Oscillator (LFO) Speed of the Chorus or Flanger. Range of this control
is 0.06 to 16 Hz.
Depth
Adjusts the intensity of the Chorus or Flanger effect. Varies from 0 to 30 milliseconds.
C/F:Delay
Controls the delay time of the Chorus or Flanger voice. Ranges from 0 to 40 milliseconds.
✓
Feedback
Controls the fade time of the delay repeats. Higher settings take longer to fade out , while a setting of
zero will limit the delay to one repeat. Varies from Off to 99%.
Delay TIme
Sets the delay time for the delay tap. Delay time ranges from 0 to 300 milliseconds.
WvFrm
Selects which waveform the LFO follows. Options for this control include: Sine, Triangle, SP1 (Special 1),
and SP2 (Special 2).
PARAM.
DESCRIPTION
Multi Effects Modules
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Fx: Level
Controls the signal input level fed to the Module. Varies from OFF to 100%.
FdBck
(Flanger)
Controls how much of the flanged signal is fed back to the input of the module. The FdBack parameter
is what gives flangers their distinctive voice Flangers are capable of both positive and negative feedback
loops, so experiment to find the sound you like best. Ranges from 0 to 30 milliseconds.
TapIt
Allows you to change the Delay time in real-time by tapping the TAPIT button at the tempo you want.
Delay voice percentages do not change when using this control.
✓
✓
✓
✓
Level
C/F/D
Controls the overall output level of each effect block. Ranges from Off to 100%.
✓
✓
Pan
C/F/D
Controls the stereo soundfield placement of each effect block. Ranges from -99 to 99.
✓
✓
✓
✓
✓
✓
✓
✓
✓
Section 3 - Effects and Parameters
Studio 400 Owner's Manual
