DigiTech RP155, Руководство пользователя

Страница: 42 / 52

36
Section Four - Other Functions
Phrase Looper
The RP155 features a built-in 20 second Phrase Looper for creating on the fly performance loops
of the music you play. The Phrase Looper can be accessed any time during performance and used
with any of the RP’s presets. To use the Phrase Looper, follow these steps:
1. Press and hold the left Down Footswitch for 2 seconds until
LP
appears in the display. The
LOOPER LED in the matrix will also light indicating the Looper is now active.
2. Arm the Phrase Looper to record by pressing the Down Footswitch again. The display will
read
AR
meaning it is armed and ready for you to start playing (You can also start recording
immediately when this footswitch is pressed).
3. Begin playing a phrase on the guitar. The Phrase Looper will begin recording anything that is
played. The display will read
rC
.
4. Once you are ready to set the loop point, press any footswitch. The display will briefly read
PL
and the recorded phrase will now begin playing back.
5. To add an overdub to the looped phrase, press and hold the left Down Footswitch. The
display will read
Du
. While pressing down the Down Footswitch, begin playing the overdub
phrase to be added to the loop. When the Down Footswitch is released, the display will
briefly flash
PL
and the looped phrase will continue with the newly added overdub phrase
added.
6. To stop the Phrase Looper, press and release the left Down Footswitch quickly. You can
resume playback by pressing this footswitch again.
7. To clear a recorded loop, stop the loop playback first as outlined in step 6 and then press and
hold left Down Footswitch for 2 seconds until the display reads
LC
.
8. To exit the Phrase Looper mode, press and hold left Down Footswitch for 4 seconds until the
display reads
LE
and then returns to the preset number display.