HOLD FUNCTION
The hold function freezes the reading in the display, press the HOLD
button momentarily to activate or to exit the hold function.
AUTO POWER OFF
The auto off feature will turn the meter off after 15 minutes.
LOW BATTERY INDICATION
The
icon will appear in the LCD display when the battery voltage
becomes low, replace the battery when this icon appears.
MAINTENANCE
WARNING:
• To avoid the electric shock, disconnect the test leads from any source of
voltage before removing the back cover or the battery or fuse covers.
• To avoid electric shock, do not operate the meter until the battery and
fuse covers are in place and fastened securely.
BATTERY INSTALLATION
To avoid the false readings, replace the battery as soon as the battery
indicator
appears.
1. Turn power off and disconnect the test leads from the meter.
2. Open the rear battery cover by using screwdriver.
3. Insert the battery into battery holder, observing the correct polarity.
4. Put the battery cover back in place, secure with the screws.
REPLACING THE FUSES
1. Turn power off and disconnect the test leads from the meter.
2. Remove the battery cover and the battery.
3. Remove the screws securing the rear cover.
4. Gently remove the old fuse and install the new fuse into fuse holder.
5. Replace and secure the rear cover, battery and battery cover.
Distributed by:
TechBrands by
Electus Distribution Pty. Ltd.
320 Victoria Rd, Rydalmere
NSW 2116 Australia
Ph: 1300 738 555
Int’l: +61 2 8832 3200
Fax: 1300 738 500
www.techbrands.com
