Connections
The DigiVerb has a single input and a pair of outputs.
Out 1
is used if
the DigiVerb is being connected to only one amplifier.
Out 2
is used for
stereo operation. Connect
Out 1
to amplifier 1 or the input of a mixer
channel and
Out 2
to amplifier 2 or the input of another mixer channel.
The Digiverb can also be connected to the effects send/return of a
mixer. Connect the mixer’s effect send to the
In (6)
of the DigiVerb.
Connect
Out 1 (9)
and
Out 2 (11)
of the DigiVerb to the return(s) of
the mixer. Since the DigiVerb is an effect pedal, a line level signal from a
mixer can distort its input. Adjust the mixer’s effect send control to
reduce any distortion.
CIT™ Cabinet Modeling
The DigiVerb also has built-in CIT™ cabinet modeling. This is a useful
tool when running a distortion pedal into the DigiVerb and then running
direct into a mixer or recorder. CIT cabinet modeling creates a guitar-
through-an-amplifier sound without having to use a guitar amp.
