DigiTech BP335, Руководство пользователя

Страница: 27 / 40

23
Step Filter (
stpflt
)
The DigiTech Step Filter is like an automatic “random wah” with a square waveform.
Pre/Post Amp - Knob 2 determines where the effect appears in the effects chain. Turn
counter-clockwise for Pre (appears before the Distortion effect), or clockwise for Post
(appears after the Noise Gate effect).
Speed - Knob 3 adjusts the speed of the Wah effect. Ranges from
0
to
99
.
Intensity - Knob 4 controls the intensity of the Wah effect. Ranges from
0
to
99
.
DigiTech Whammy
®
(
wHammy
)
The DigiTech Whammy
®
is an effect that uses an Expression Pedal to bend the pitch of the
incoming signal, or add a bendable harmony with the original signal. As the Pedal is moved, the
note bends either up or down. When DigiTech Whammy is selected, it is automatically placed
before the Amp modeling as shown in the block diagram on page 13.
Pre/Post Amp - Knob 2 determines where the effect appears in the effects chain. Turn
counter-clockwise for Pre (appears before the Distortion effect), or clockwise for Post
(appears after the Noise Gate effect).
Shift Amount - Knob 3 selects the interval and direction of the pitch bend. Choices are
as follows:
Whammy
TM
(no Dry Signal)
oct up
(1 octave above)
2octup
(2 octaves above)
2nd dn
(a second below)
rv2ndn
(a second below reversed pedal action)
4th dn
(a fourth below)
oct dn
(an octave below)
2octdn
(2 octaves below)
DIVeBM
(Dive Bomb)
Harmony Bends (Dry Signal Added)
m3>Mj3
(a minor third to a Major third)
2ndmj3
(a second above to a Major third above)
3rd4th
(a third above to a fourth above)
4th5th
(a fourth above to a fifth above)
5thoct
(a fifth above to an octave above)
hoctup
(one octave above)
hoctdn
(one octave down)
octu>d
(octave up/down)
Pedal Position - Knob 5 provides a manual control of the Whammy pedal position.
Ranges from
0
to
99
.
Mix - Knob 6 adjusts the Whammy mix. Ranges from
0
to
99
.
Pitch Shift (
PitCH
)
A Pitch Shifter copies the incoming signal, then shifts the pitch of the copy to a different note.
The shifted note is then mixed back with the original signal, sounding as if two basses were play-
ing different notes.
Pre/Post Amp - Knob 2 determines where the effect appears in the effects chain. Turn
counter-clockwise for Pre (appears before the Distortion effect), or clockwise for Post
(appears after the Noise Gate effect).
Shift Amount - Knob 3 selects the interval of the shifted pitch. Ranges from
-24
(2
octaves below) to
24
(2 octaves above).
Mix - Knob 6 controls the mix level of the shifted pitch. Ranges from
0
to
99
.