DigiTech BASS SYNTH WAH, Руководство пользователя

Страница: 8 / 16

7. Pedal Release Pins
These two pins are spring-loaded hinges that hold the pedal in place.
Push these pins in to release the pedal from the pedal chassis
exposing the battery compartment. (See battery replacement
diagram.)
8. Pedal
Press the pedal to turn the effect on and off.
9. Out 1 Normal (Dry) Jack
Use this output when only one amplifier or mixer channel is used.
When both
Out 1 Normal (Dry) and Out 2 (Effect) are
connected, only dry, unprocessed bass signal is present at Out 1
Normal (Dry) when the Bass Synth Wah is on or bypassed.