Button Commands:
SNOOZE/LIGHT button:
-
Activates the backlight for 8 seconds.
-
Stops the alarm temporarily for 5 minutes.
MODE/ENTER button:
-
Press once to choose the clock display:
o
Hour/Minute/Second
o
Hour/Minute/Weekday
o
Calendar
o
Buzzer Volume viewing
o
Key Tone On/Off
Note: The unit will return automatically to Hour/Minute/Second display after viewing the Calendar
or Buzzer Volume for 10 seconds
UP button:
-
In the clock setting mode, press once to increase the setting value or toggle between 12/24 hour
format, toggle the temperature unit C°/F°, RCC on/off, buzzer volume/frequency high/low.
-
In alarm setting mode, press once to increase the setting value or select the alarm mode (alarm,
vibration, both alarm and vibration, neither).
-
In normal mode, press and hold for 2 seconds to activate RCC.
-
In RCC receiving mode, press once to deactivate RCC.
DOWN button:
-
In the clock setting mode, press once to decrease the setting value or toggle between 12/24 hour
format, toggle the temperature unit C°/F°, RCC on/off, buzzer volume/frequency high/low.
-
In alarm setting mode, press once to decrease the setting value or select the alarm mode (alarm,
vibration, both alarm and vibration, neither).
-
In normal mode, press and hold for 2 seconds to send sync command, which will last 90 seconds.
Press any key to stop sending the sync command and return to normal mode.
ALARM button:
-
Press once to cycle through:
o
Normal mode
o
Alarm 1 view mode
o
Alarm 2 view mode
-
In alarm 1/alarm 2 view modes, press and hold key for 2 seconds to enter alarm setting for each
mode respectively.
RESET button:
-
Press to reset the system, located inside the battery compartment.
