2 - CONNECTING THE ACCESS POINT
The Access Point has an radio antenna ensuring the link between the Beltpacks and the TX-Box.
The Access Point connects to the RJ45 port of the TX-Box dedicated to this use.
Overline Systems is not the distributor of the provided antenna but applies a specifi c confi guration on
the Access Point to optimize its exclusive use as part of the Digitear system.
The Access Point provided with Digitear has been specifi cally programmed by Overline Systems for the
Digitear system.
WARNING: The RJ45 connector of the TX-Box does not have a POE (Power Over Ethernet).
It is therefore necessary to power the Access Point via its provided power supply or via a POE
switch.
For more information, refer to the «Access Point Technical documentation».
Once the Access Point is powered on the same network as the TX-Box, the Digitear network is running.
Power cord
provided
with the Ac
l’Access Point
TX-Box 12v Power
RJ45 ethernet cable
Connect the RJ45 directly to
the TX-Box
Overline-Systems - www-digitear.eu - [email protected]
Page 4/6
QUICK INSTALLATION GUIDE
