The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third party
is strictly prohibited.
25
Tariff Show
The
Tariff Show
is a viewer function included in the “
SelfFunction Menu
”. So it must be included in the settings
of the tariff programmed.
The
Tariff Show
allows to view the 7 most important metrological values programmed in up to 8 blocks of the
tariff (t1, t2, t3, t4, t5, t6, t7, and t8).
Depending on the country that taximeter will be used, the values showed for distance will be expressed in the
local distance measurement system. And the values showed for prices will be, of course, in the local currency.
These 7 values are shown in the following parameters (in order of appearance) for each programmed Block,
the procedure is showed in the following page (33):
Amount for Initial Drop
=A
Initial Amount
First Unit Distance
= b
Distance 1st Unit
[m/unit
]
Following Units Distance
= b1
Distance Other Units
[m/unit
]
Seconds for First Unit Waiting Time
= c
Time 1st Unit
[s/unit
]
Seconds for Following Units Waiting Time = c1
Time other Units
[s/unit
]
Price per distance
= d
Amount per km
Price per time
= E
Amount per Hour
Also in the Tariff Show viewer is possible to display the 4 programmed extras values
Amount Extra number 1
= F1
Extra Amount
Amount Extra number 2
= F2
Extra Amount
Amount Extra number 3
= F3
Extra Amount
Amount Extra number 4
= F4
Extra Amount
