Serial Nr. ................................................
Date of Installation .................................
Name .....................................................
...............................................................
Address .................................................
...............................................................
Tel n° .....................................................
WARRANTY TERMS
AND CONDITIONS
Digitax warrants this product to be free from defects
in materials and workmanship for a period of twelve
calendar months from the date of installation.
To obtain the bene
fi
ts of this warranty, the registration
card must be completed and returned to the factory
or your national importer within 14 days of purchase.
In case the taximeter needs to be repaired, it must be
sent, free of transportation cost, back to the manufac-
turer or to the service center as indicated by the local
representative.
This warranty is void if the equipment is modi
fi
ed or
misused in any way or serviced by unauthorized per-
sons.
No responsibility can be accepted for any loss or dam-
age caused in transit, except for repair or substitution
of defective parts. No other liability will be recognized
by Digitax for any kind of damage or loss to person
or goods.
User Manual
ver.1.0
SET TIME AND DATE
Settings
In order to manually programme the clock, please check
that you are in For Hire position (by
OP
) and then
press
K1
and
K3
at the same time. The sign “
Time
”
appears on the main display for a few seconds and then
For Hire and Stopped will
fl
ash at the same time.
In the two left digits of the main display, the day is dis-
played, in the right ones the month. On the secondary
display, in the left digit, the hours are displayed and
in the right ones the minutes. Please
fi
nd here below
the functions of the keys in this programming menu:
PROGRAMMING START:
PRESS K1 + K3 AT THE SAME TIME
K1
Sets the day number
K2
Sets the month number
K3
Sets the hour
K4
Sets the minutes
OP
By pushing it, you move to the year set up
When you select the year to change by
OP
,
K
keys
have the following functions:
K1
Decreases the year of one unit
K2
Increases the year of one unit
K3
Sets the taximeter manufacturing year
PROGRAMMING END AND DATA CONFIRMATION:
PRESS OP
HOW TO CONVERT THE LOCAL
CURRENCY INTO EURO AND VICE-VERSA
IN
HIRED
&
STOPPED
MODE
DEPRESS and RELEASE
K1
+
K2
keys
to toggle from the local currency to Euro
and vice-versa
Day Month
Hour Minutes
Push Together
Sets the Day
Sets the Month
Sets the Hour
Sets the Minutes
Press to set the Year
Set the Year
Press to end the programming and to con
fi
rm data
+
-
1
2
3
4
5
6
7