23
DEFAULT SETTINGS
: Restore all the settings as the factory setting.
2.2.3.12
PTZ SETUP
Move the cursor to
【
PTZ SETUP
】
（
Icon highlighted when selected
）
,press
【
Enter
】
to enter into
setting interface, you can setup the parameters for each channel separately.
CHANNEL:
The channel of PTZ connected.
PROTOCOL:
select the protocol of different PTZ, there are two protocols to switch, and the
default is Pelco-D
BAUD RATE:
select the different baud rate for your PTZ, there are 1200, 2400, 4800, and 9600
DATA BIT:
there are 5,6,7,8 options to select, default setting is 8.
STOP BIT:
there are 1and 2 to select, the default setting is 1.
VERIFY:
there are None/Odd/Even/Mark/Space to select, the default setting is none.
ADDRESS:
Fill the code of respective PTZ
2.2.3.13
NETWORK SETUP
Move the cursor to [NETWORK SETUP] (icon thighlitend when selected), and press
【
Enter
】
www.digitalworld.ro Tel. 021-411.06.75, 0722.206.683
Di
git
al
W
ORLD
