Page 9 of 35
Position : Adjust OSD menu position
Transparency : Set OSD transparency
Press – or + (- + ) Total : 100 steps
Reset : Load factory default settings.
Press down on OSD keypad to factory reset
TEMP
Reporting the on board temperature (
0
C)
[Firmware version : V1.02.00 or up]
Items marked
4
have sub menus.
Exit the OSD menu to save the setting chosen
On board temperature reading :
This controller has a built in on board temperature sensor on U4 which can report the on board temperature reading on
OSD menu. (See below) :
On board temperature reading on OSD menu
