DigitaLinx DL-HDFO Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 13

DigitaLinx DL-HDFO Скачать руководство пользователя страница 7

1-6

Important: Please ensure the installation procedure below is followed.

Improper operation or no operation of the devices may result if these are

not followed. Installation assumes Fiber Cable(s) and Category 5/5e cable is

previously installed and has been confirmed good.

1.) Carefully unpack the contents of the shipping package and verify all

components are present.

2.) With all components powered down (HDMI source and Display) connect the

TX box to the HDMI source using a copper HDMI interconnect cable from 1-8

meters in length.

3.) With all components powered down (HDMI source and Display) connect the

RX box to the HDMI Display using a copper HDMI interconnect cable from 1-8

meters in length.

Installation

Installation

DL-HDFO TX Unit

HDMI or DVI Source Unit

LWC

LWC

DL-HDFO RX Unit

LWC

LWC

Display Unit

Installation Procedures

Important: Please ensure the installation procedure below is followed. Improper operation or no
operation of the devices may result if these are not followed. Installation assumes Fiber Cable(s) and
Category 5/5e cable is previously installed and has been confirmed good.

1.) Carefully unpack the contents of the shipping package and verify all components are present.
2.) With all components powered down (HDMI source and Display) connect the TX box to the HDMI

source using a copper HDMI interconnect cable from 1-8 meters in length.

3.) With all components powered down (HDMI source and Display) connect the RX box to the

HDMI Display using a copper HDMI interconnect cable from 1-8 meters in length.

Page 1-6

DL-HDFO TX Unit

HDMI or DVI Source Unit

LWC

LWC

DL-HDFO RX Unit

LWC

LWC

Display Unit

Installation Procedures

Important: Please ensure the installation procedure below is followed. Improper operation or no
operation of the devices may result if these are not followed. Installation assumes Fiber Cable(s) and
Category 5/5e cable is previously installed and has been confirmed good.

1.) Carefully unpack the contents of the shipping package and verify all components are present.
2.) With all components powered down (HDMI source and Display) connect the TX box to the HDMI

source using a copper HDMI interconnect cable from 1-8 meters in length.

3.) With all components powered down (HDMI source and Display) connect the RX box to the

HDMI Display using a copper HDMI interconnect cable from 1-8 meters in length.

Page 1-6

«
...
5
6
7
8
9
...
»

Содержание DL-HDFO














Отзывы:

Нет отзывов