DIGITALas MDVR-4F3AHD mini, Инструкция по использованию

Страница: 6 / 35

MDVR-4F3AHD mini (LAN/WiFi/GPS)
- 4 -
3.1 SD card and hard disk LED indicator light and state description
 【
PWR
】
The power input status indicator. The light indicates that the power supply of the system is
working normally.
；
 【
SD
】
SD card working light. The light often shows that the SD card works well. The SD card slot is
used to record video data, configuration files update and upgrade.
。
 【
ALM
】
A warning light, when the system has an alarm, the light is bright and the light is out when
there is no alarm.

【
VLOSS
】
When there is any way of video loss, this light is on

【
GPS
】
The light is lit when the GPS signal is located, and the light is destroyed when the location is
not located or the location fails.
；
 【
REC
】
Video work indicator. The LED light indicates that the current is being videotaped
。
 【
LOCK
】
Control device switch machine, boot the lock and SD card or hard disk, anti plug
；
 【
SIM
】
3G/4G phone card slot;
 【
USB
】
Is used to copy videos or upgrade.
。
 【
AV
】
Pre video output port;
；
 【
IR
】
Remote control input for receiving a remote control signal
。
3.2 The definition of the rear panel
SD card and hard disk backboard state Back plate state of 8 way hard disk
 【
DC8-36V
】
The power interface, the red line is connected to the power source of the vehicle; the
black line is connected with the negative pole of the power supply and the yellow line is the ACC